HOW TO USE THE SOLWAY SYSTEM
CLICK HERE IF YOU HAVE BROADBAND AND WISH TO VIEW VIDEO CLIPS OF THE BIN BEING ASSEMBLED AND IN USE.
1. Assemble the plastic bin (it is delivered as a flat sheet), insert the liner and clamp on the lid. (The entire assembly process takes about 2 minutes as shown on the video clip).
2. Start to fill the bin with waste and periodically compact the material using one of the various methods such as compressing with a weight as shown.
3. When the liner is full, tie it off with a cable tie and then unclip the bin wall to free the liner.
4. Move the bin, and once the liner is removed the bin can be set up once more and the next liner can be filled.


5. If you have 3 or more liners to collect you can contact us and we will remove them.
The driver will attach an ID label to each liner for traceability purposes.
Our vehicle will grab the liners, therefore removing the need for you to be on site.
The driver will leave the Waste Transfer Note with your farm office if you are not present.



